A. Excavation: in all soils including hard soils, but excluding soft rock and hard rock for foundation to a depth 5’0” to 6’0” for columns footings and sizes as per foundation drawings including using the selected excavated materials for back filling in foundations, watering and consolidating in layers of 15 cms.

B. Earth Filling: Filling of earth in plinth level.

C. Parking area: 1’0” level. (ROAD LVL 0’-0” LVL), House portion: +2’6” LVL (ROAD LVL 0’-0” LVL).

Block masonry walls: 6” thk Solid Block (cost up to 32/-) walls in CM 1:6 for all external walls and 4” thk solid block (cost up to 28/-) for internal bedroom wall and internal partition walls like Kitchen, utility and toilet

Cement:

Meenakshi, Sunvik (53 Grade and 43 Grade)

Sand:

M Sand (Gov. approved) For Column, Concrete work, block work and plastering.

Steel:

Prime Gold TMT steel 555, Kamadenu

Floor to floor height:

10’0” unless otherwise specified.

a. PCC 1:4:8:

Foundation and below flooring using course graded aggregate of 40mm and downsize 4” thick.

b. FOOTINGS:

RCC 25 Grade Or as specified by Structural drawings for Footings as per the drawing with M.S sheet shuttering.

c. COLUMNS:

RCC 25 Grade Or as specified by Structural drawings for columns as per the drawing with M.S sheet shuttering.

d. PLINTH BEAMS:

RCC 1:1.5:3 / (20 Grade) Or as specified by Structural drawings for plinth beams with M.S/ wooden plank sheet shuttering.

e. LINTELS:

RCC 1:2:3 / (20 Grade) Or as specified by Structural drawings for cut lintels with wooden plank sheet shuttering.

f. ROOF SLAB & LIFT WALL:

RCC 25 Grade for 150mm slab size Or as specified by Structural drawings for roof slab as per drawings with M.S sheet shuttering. After shuttering Mat to be spread. Water proofing liquid shall be used for beams and slab concreting.

g. ROOF BEAMS:

RCC 25 Grade Or as specified by Structural drawings for beams as per the drawings with M.S sheet/ wooden plank shuttering.

h. STAIRCASE:

RCC 25 Grade Or as specified by Structural drawings, with M.S sheet shuttering and wooden planks for risers. Folded plate staircase for internal staircase only

a. Columns and Beams shall be covered with gunny bags duly watered continuously.

b. Columns after casting, the water bottle duly filled with holes 2-3 nos.

c. Slabs: ponds of size 4’0” x 4”0” with cement mortar dividers shall be constructed. Water height of min 3” shall be maintained for minimum period of 15 days

II. Shuttering: All shuttering poles shall be braced properly. Shuttering shall be levelled before fabrication of reinforcement. All the column-beam junction & beam-beam junction gaps shall be closed properly by using cotton waste to avoid leakage of slurry.

III. De Shuttering: Beam external sides & column boxes shall be removed after 24 hours of concreting. Beam bottom up to 21 days, slabs from 15-21 days

Ceiling Plastering:

In CM 1:4 for ceiling 12mm thick with lime rendering with M sand

Internal Plastering:

In CM 1:5 20mm with lime rendering for internal walls with M sand

Dado Plastering:

In CM 1:5 20mm thick screed/rough to wall for doadoing with M sand

External Plastering:

In CM 1:5 20mm thick with sand Face finish for external walls with M Sand

Waterproofing:

for terrace by cement madi and sunken slab with 20mm down size aggregate & Wpc. Sunken slab water proofing should not be disturbed after completion of works.

Toilets:

All Sunken slabs to be filled with cinder, PCC 1:3:6 above cinder.

Flagging concrete in CC 1:3:6 around the building 2’0” wide including required excavation and consolidation.

Terrace Railings:

Side wall and M S handrail for the front portion to a height of 2’6” ht. As per elevation

O H Tank:

O H Tank slab with railings 2’0” ht. (50.00 sqft at 5’0” ht from terrace).

Well known branded of client’s choice: Entry level prices.

1. Concealed and exposed piping with CPVC Pipe of specified Dia. of ISI make (Astral / Supreme brand).

2. Rainwater and Sanitary pipe of PVC with necessary fittings (Supreme Brand).

3. Solar connections will be provided to all Bathrooms at shower area only.

4. Plumbing work is considered for Kitchen and bathrooms.

Wall Mixer:

2-in-1 wall mixer including head shower at cost up to Rs. 4,000/-

Western commode:

SET (at cost up to Rs. 5000/-) Branded Parryware.

Pedestal Wash Basin:

SET (at cost up to Rs. 1500/-)

Pillar cock set (at cost Rs. 1500/-) for wash basin.

Angular cock for wash basin and Health faucet at cost of Rs.150/-

One wash basin with complete set is considered for dining area at cost Rs.2500/-

Each bathroom contains necessary fittings like Western commode, Wall mixer with Head shower set and Wash basin set.

Anchor Roma Brand Boxes, Plates & Switches

Copper wire of ISI brand V-Guard brand (Gauge: 4 sqr mm will be used for heating points and main circuits, 2.5/ 1.5mm / 1mm will be used for lighting and other points.

Electrical Points – Standard points will be given and as per Architects drawing.

The electrical conduits, switch boxes, switch plates, junction boxes, distribution boards, fan hook boxes, bulb sockets, and wiring will be provided on the following guidelines: (For each individual dwelling units)

The materials for the above electrical work assumed are as follows:

Distribution board in each floor.

One electrical meter as supplied by the authority in the ground floor.

PVC pipes – Prince/Universal.

Switches and switch plates- Anchor Roma

Wiring – V guard.

Note:

UPS point will be extra is considered for all floors.

NOTE:

Electrical Fittings, Bathroom Accessories (fans, lights, bathroom trays, mirrors etc. are not considered)

1. Main Door Frames & Shutters:

Sal wood frame of 120mm X 100mm section, with 32mm thick Solid wood Shutter (150sqft) with Necessary fittings (each main door will be provided with one Godrej / Europa Lock at cost up to 3,000/- each) and brass fittings like Antique finished hinges, handles and tower bolts.

Rooms Door Frames & Shutters:

Red sal wood frames of 100mm X 75mm section, Masonite Skin doors at cost up to 120.0 / sq. ft., with powder coated Fittings.

Bathroom Door and Frame:

PVC Frame and Door 25mm ( cost up to 3k)

All Windows Frames & Shutters:

Aluminum window (Up to the cost of 220/- SFT)

Note:

No carving work / carving beading is not considered.

Max. Three feet/four feet width without folding for outdoor and internal staircase.

Balcony:

M.S railings for Balcony / sit out at cost up to Rs. 120/- per sft.

Staircase Railings:

MS staircase railings at cost up to Rs. 120/- per sft

MS Main entrance gate with good design of size 2400mm X 1200mm at cost Rs.200 per sft.

Living Dinning and Kitchen:

600mm X 600mm Vitrified flooring cost up to Rs. 60/- per sft considered with 100mm skirting of same tile.

BEDROOM and other vitrified flooring cost up to Rs 50/- with 100mm skirting of same vitrified

Bathroom floor and wall: 300mm X 300mm Anti-skid tiles of cost up to Rs. 40/- per sft are considered at bathrooms for wall and floor.

Kitchen and Pooja: 600mm X 300mm Glazed tiles of cost up to Rs.40/- per sft is considered for kitchen and Pooja wall cladding.

Note: Bathroom and Pooja room cladding up to 7ft. height and Kitchen cladding 2ft from above the granite counter.

Sadarhalli Granite, Kota stone OR Cost up to 50 to 55rs /sft, For external staircase for Treads, risers, landings and skirting, treads with half nosing, skirting with edge chamfering

Anti-Skid tiles of size 300mm X 300mm at cost up to Rs.30/- sft is considered for car parking area, excluding compound passages.

1. 19mm granite slab with Stainless steel Bowl or sink.

Note:

1. Rs.3000/- is considered for stainless steel bowl with drain board.(considering 1nos)

2. Rs. 60/- per sft considered for Granite slab / platform (considering 150sft)

3. 1 No. of long neck tap with set will be provided in kitchen at cost up to Rs. 1000 each.

4. 1 water inlet point for water purifier with angular cock will be provided.

1. Internal Walls and Ceiling: 2 coats of Birla or JK wall Putty and 2 coats of tractor emulsion paint

2. External Walls: 1 coat wall primer, 2 coats Asian ACE weather Coat paint.

3. Teak Doors: Polishing, with necessary base work

Railings and Gate – Enamel paint

6000 Ltrs capacity water sump will be constructed by using 9” Brick Work Masonry with smooth finish inside (Capacity is as per site conditions).

Sump Cover of size 600mm X 600mm of GI coated will be provided.

1 No. 1000 Ltrs Double layer equivalent brand water tank will be provided

1. Necessary seating arrangement will be done to keep the water tank.

RWH tanks and system will be extra and billed on actual

4” thick Block work masonry on both sides sponge finish plastering up to height 900mm.

Architect drawings, structural drawing and 2d Elevation by ASV.